Les Petits Makers font de la 3D


Cette année les petits makers ont principalement utilisé TinkerCad pour leur réalisations.

L’avantage de ce dernier est d’être une plateforme de conception 3D en ligne accessible via un navigateur. Il est également relativement intuitif, et quelques minutes suffisent pour s’initier.

Certains petits makers ont ensuite proposé l’utilisation de Sculptris, un logiciel de modelisation 3D qui permet de sculpter à partir de formes predefinies.
Cette découverte a donné naissance à une session de création de « petits monstres ». (en 3D ci-dessous, utilisez la souris pour les voir en détails).

[canvasio3D width= »400″ height= »300″ border= »7″ borderCol= »#010956″ dropShadow= »0″ backCol= »#b9f5c2″ backImg= »… » mouse= »on » rollMode= »off » rollSpeedH= »0″ rollSpeedV= »0″ objPath= »nael2 » objScale= »10″ objColor= »#dc5725″ lightSet= »7″ reflection= »on » refVal= »5″ objShadow= »off » floor= »off » floorHeight= »42″ lightRotate= »off » Help= »off »] [/canvasio3D]
[canvasio3D width= »320″ height= »240″ border= »7″ borderCol= »#010956″ dropShadow= »0″ backCol= »#b9f5c2″ backImg= »… » mouse= »on » rollMode= »off » rollSpeedH= »0″ rollSpeedV= »0″ objPath= »nael » objScale= »0.5″ objColor= »#890019″ lightSet= »7″ reflection= »on » refVal= »5″ objShadow= »off » floor= »off » floorHeight= »42″ lightRotate= »off » Help= »off »] [/canvasio3D]
[canvasio3D width= »320″ height= »240″ border= »7″ borderCol= »#010956″ dropShadow= »0″ backCol= »#b9f5c2″ backImg= »… » mouse= »on » rollMode= »off » rollSpeedH= »0″ rollSpeedV= »0″ objPath= »souley » objScale= »10″ objColor= »orange » lightSet= »7″ reflection= »on » refVal= »5″ objShadow= »off » floor= »off » floorHeight= »42″ lightRotate= »off » Help= »off »] [/canvasio3D]

Ces « Petits monstres ont donné naissance au projet de création d’un jeu de plateau (« Makers Clash ») dont le design et les règles ont été définies au fil des ateliers avec et par les Petis Makers (article à venir).